1Table of Contents Before You Begin 2 K1-F-S Installation 3 K1-TS-S & K1-A1-S Installation 6 K2-A1-S Installati
1011K1-A1-S AttachmentK1 & K2 Series Manual 6.0W X 4 R1.indd 12/15/2005, 8:57 AM10
1011K2-A1-S Installation Instructions Attach the Screen Plate to the Screen!Caution: With the screen plate in place, test the screw length to ensure t
1213Attach the Wall Plate to the Wall!Concrete anchors are not provided. To mount to a brick or concrete wall, purchase concrete anchors to accomodat
1213Assemble the Arm1. Assemble the arm, and attach it to the wall plate.K1 & K2 Series Manual 6.0W X 4 R1.indd 12/15/2005, 8:57 AM13
1415Attach the Screen to the ArmUsing the included inside hex and outside hex wrenchs, attach the screen to the wall plate. K1 & K2 Series Manual
1415K1-UC-S (Under-Cabinet Mount) InstallationDrill the Mounting Holes1. Remove the contents of your cabinet. 2. Hold the bracket under the cabinet
1617Attach the Front Cap Piece1. Slide the cap piece onto the bracket as shown. K1 & K2 Series Manual 6.0W X 4 R1.indd 12/15/2005, 8:57 AM16
1617Attach the Mount to the Cabinet1. Insert four mounting screws down through the holes drilled earlier. 2. Place a spacer on each screw between the
1819Attach the Screen to the Mount!Caution: With the screen plate in place, test the screw length to ensure that they do not extend past the screen ho
1819Specications!Caution: These mounting brackets are intended for use only with the maximum weights indicated. Use with products heavier than the m
23Before You BeginSTOPDo not attempt to install this product if you do not understand the instructions or if there are missing or defective parts. Imp
20K1 & K2 Series Manual 6.0W X 4 R1.indd 12/15/2005, 8:57 AM20
23K1-F-S Installation Instructions Attach the Screen Plate to the Screen!Caution: With the screen plate in place, test the screw length to ensure that
45Attach the Wall Plate to the Wall!Concrete anchors are not provided. To mount to a brick or concrete wall, purchase concrete anchors to accomodate
45Attach the Screen to the Wall Plate1. Push the screen plate against the wall plate and then let it slide down into place.2. Fasten the screw throu
67K1-TS-S & K1-A1-S Installation Attach the Screen Plate to the Screen!Caution: With the screen plate in place, test the screw length to ensure th
67Attach the Wall Plate to the Wall!Concrete anchors are not provided. To mount to a brick or concrete wall, purchase concrete anchors to accomodate
89Assemble the Arm (K1-A1-S only)1. Assemble the arm, and attach it to the wall plate.K1 & K2 Series Manual 6.0W X 4 R1.indd 12/15/2005, 8:57 AM8
89Attach the Screen to the Wall PlateUsing the included inside hex and outside hex wrenchs, attach the screen to the wall plate. The K1-TS-S is pictu
Comments to this Manuals